Consol 1119LV a two component adhesive system composed of 100% solid Epoxy that contain polyamide curing agent ensuring a though and durable bond resistant to chemicals and corrosion. This unique low viscosity adhesive is primarily designed for the all around remedy of structural concrete defects and flaws particularly the repair of cracks by pressure injection. Aside from sealing cracks and crevices and filling voids, it can also be combined with fine aggregates or silica sand to result in an Epoxy Mortar for high strength grouting.
a.) VERSATILE – suitable to a wide variety of concrete structure application as to leak repair, concrete binder and grouting application.
b.) ECONOMICAL – damaged concrete membrane, which requires new construction, can be restored to its structural durability.
c.) EXCELLENT ADHESIVE PROPERTY – structural concrete repair system using Consol 1119LV can withstand earthquake movements.
d.) EASE OF APPLICATION – Consol 1119LV has a low viscosity property with a minimum pot-life, applicable for high pressure and mechanical equipment.
Blow compressed air along the crack lines to completely clean, dry, and remove dirt and other loose contaminating materials. Provide temporary seal on crack surface except entry and exit ports. Inject Consol 1119LV starting at the lowest entry port up to proceeding ports until the voids are completely filled.
EPOXY GROUTING V-CUT SYSTEM:
V-cut all cracks for repair. Blow compressed air along the crack lines to completely clean, dry and remove dirt and other loose contaminating material. Apply by brush pure Consol 1119LV to serve as primer then apply Consol 1119LV mixed with silica sand or patching compound on v-cut surface.
EPOXY GROUTING ON CONCRETE HONEYCOMB:
Chip off loose concrete. Remove dust, dirt and other loose contaminating materials. Install formworks on honeycomb providing for a small opening on the upper portion. Pour Consol 1119LV mixed with silica sand. Remove formworks upon curing of epoxy grout.
MIXING AND CLEANING
Mix thoroughly by volume 2 parts of resin to 1 part of hardener for 3 to 4 minutes. Any changes from the recommended proportion will affect its quality. Scrape the bottoms, sides and corners of the container to ensure complete and full blending
Available in one gallon.
Minimum of 12 months under normal condition (80˚F)
Pressure injection tools and other equipment maybe cleaned with Epoxy Reducer while the mixture has not yet hardened. Wash off hands with detergents and warm water.
Avoid contact with eyes and skin and avoid breathing its vapor. This product may cause severe skin irritation after prolonged or repeated exposure. Keep containers tightly closed and store in cool dry place.