One Component Waterproofing Membrane
Rooftex is specifically design as elastomeric, polyurethane extended
Membrance for all kinds of waterproofing applications. The product can be used for
Waterproofing areas, wet areas, foundations and planters. It cures on exposure to atmosphere to a tough rubber like seamless finish with excellent surface adhesion and elasticity.
Rooftex is a cold applied one component, moisture curing, modified polyurethane elastomeric waterproofing membrance .
• Easily applied by brush, squeegee blade or airless spray
• Provides a uniform, joint free, seamless membrane
• UV stable does not harden or become brittle
• Good oxidation stability
• Unaffected by rain soon after application
• Total adhesion to substrates
• Can be easily repaired it damage
Tensile strength: Approx 1.6 N/mm
Elongation: Approx 500%
Recovery (100% elongation) 24hrs: 100%
Total solids: 90-95%
Cure- Tack free: Approx 24hrs
Through: Approx 40-72hrs
Service Strength: Achieved after 7 days
Specific gravity: Approx 1.3
Weatherometer: (BS3900)2000hrs- no loss of gloss
Still pliable-no brittleness-no loss of general properties.
The result shown above are typical and rare based on a simple taken from batch number 2554.
Whilst we expect to achieve these results during manufacture, we would allow the tolerance of
Rooftex should not be applied at temperature below 10 Celsius degree and above 45 Celsius degree
All surfaces to be treated should be clean, dry and sound.
Concrete/cementitious screeds should be fully cured. Specials Primers are
Available and recommended for use over existing membranes, porus/weak
Concrete, cementitious screeds and asbestos sheets prior to application of
Rooftez waterproofing membrane
Roofter Urethane Primer- for use with new concrete, cemetitious screeds
Etc when the surface is porous
Roofter GP Primer- specially formulated for use with bituminous, asphalt surfaces,
Old or failed membranes, metal, glass and timber.
Roofab Scrim- designed to reinforce Rooftex for use on up stand joints
Complete coverage of old, failed roofting system, reinforcing joints on timber decking etc.
COVERAGE AND PACK SIZES
Pack size kg/Ltr: Coverage
22.5kg: minimum 1.5kg m (2 coats)
Rooftex Urithane Primer
5ltr & 25ltr: 6-8m per liter
Rooftex GP Primer
5ltr & 25ltr: 6-8m per liter
Shelf life at least 12 months if stored in original containers between 10 Celsius degree and 25 Celsius degree and away direct sunlight.
SUPPLY & TECHNICAL SERVICE
All information provide in this leaflet is based on results obtained from our own experience and test and
Is giving in good faith. The user will be deemed to have satisfied himself independently of the suitability of Conren’s products for his own particular purpose. We guarantee to replace, free of charge, any goods supplies by us which are prove to our satisfaction defective, but as the application these materials is necessarily beyond our control, we will not concept responsibility for any damage or loss arising wholly
Or in a part from these materials, except as here in provided, any express or implied condition, warranty, statement or representation, statutory or otherwise as to the quality of the goods is expressly
Conren Limited has worldwide representation with exclusive, fully trained and experience applicators. Full applications details together with additional descriptive literature available on request.
Exclusively Distributed by:
Concrete Solution Builders and Supply
36 Lourdes Castillo st. Brgy. Don. Manuel
Sta. Mesa Heights, Quezon City
Tel No’s.: 741-8702, 7417106 Fax No.:742-5230